Skiffy-a-saurus Wins Again!

Skiffy-a-saurus Wins Again!

By Jeffrey Smith

We built a new skiff for this season and we’ve been really loving how much it’s changed things.

It was kind of a last minute decision, and the builders really rushed to get it done for us. We only loaded it on board the day before our season started, It’s huge by comparison to our old skiff (which by an interesting requirement at the Alaska Department of Fish and Game, had been known as Skiffy.)  The new one is so big (to us) that we named it Skiffy-a-saurus.

We use it for all the things we used to do. It’s really good and stable (people can stand up and move around while we’re moving) and it easy to climb in and out of at the beach. We’re using it for getting into kayaks too, but but now we’ve added a couple other activities to our skiff repertoire. The best one– skiff exploring.

We didn’t use Skiffy much for exploring, because it’s capacity was so limited, usually only half the group, but now, everyone can go at once. Now when we get to a new cove or harbor and drop the anchor, we all pile in Skiffy-a-saurus and head out to explore the shoreline. We putt along at 3 or 4 knots, sometimes shutting down the motor to drift and listen, and really get to see what’s there. On this last trip alone, we watched eagles and gulls, saw deer feeding at the water’s edge, spied on crab crawling across the bottom, even drifted while harbor porpoises and icebergs circled the boat. But the best one yet… We watched a brown bear right up close!

Barnacles for Breakfast – Paw licking good!

It was morning, just before breakfast. The sun was lighting up one side of the little fjord we were anchored in. The other side was still in the shade. A brown bear swam across from the sunny side into the shadows on the other side. It was probably a half a mile down the shore. We watched it for 15 or 20 minutes, then Christine suggested we go take a look with Skiffy-a-saurus. Everyone got their cameras, and we all quietly climbed in.
.
I headed us over to the shore, then hugged the shore as I idled us close to where he was. At about a hundred feet from the bear, I shut down and let the tide carry us along the shore. We were just feet from the rocky edge. Slowly we got closer and closer, The grizzly didn’t seem to notice (or care) that we were there. No one made a sound. When we were even with him on the beach we were probably only 30 feet away! About 15 of that was deep water, so we calmly took pictures and watched as he poked among the rocks, eating barnacles and mussels.  Then we followed him back down the beach for almost another 10 minutes. It was fantastic. Chalk another one up for Skiffy-a-saurus because this moment was only possible because of it.

Skiffy-a-saurus wins again.

“Say that’s a nice skiff you have there!” – Grizzy admiring our Skiffy-a-saurus

Tin Hat Update – Putting on the Hat

New pilothouse for Alaska small cruise boatWe reached a major milestone in the Tin Hat Project this week, we put on the hat.

Early Tuesday morning just in time for sunrise we got underway. It was cold, sunny and beautiful on Bellingham Bay as we moved the David B from our slip in Squalicum Harbor to the Landings at Colony Wharf where a crane was ready to lift the Tin Hat from the shore and place it on the David B. Check out our latest video update to see us driving the David B as a convertible, the Tin Hat being lifted and set in place, and then heading back to our slip.

Thank you to Fluid Fabrication for a great job on the Tin Hat, and thank you to The Landings at Colony Wharf for a such an impressive move!

Now that The Hat is on, we have a lot of work to do to get it outfitted and ready to go for spring! We hope you’ll keep following our progress and maybe even come along on a trip with us in Alaska, the Inside Passage or in the San Juan Islands this summer to experience for yourself the new and improved David B!

-Christine

Tin Hat Update – Welding, Windows and More

Small cruise ship constructionThis week saw lots of progress on the Tin Hat Project. We stopped in at Fluid Fabrication to see how things were taking shape. They’d begun assembling the framework for the front of the pilothouse. It was the first time we got to see the curving lines of the new house for real. We’re not sure exactly how long it will take them to finish welding, but my feeling is soon. Maybe just a couple more weeks until we can bring the boat over and have the house put on.

While the welders have been busy, Jeffrey, Tim, and Greg have continued on all of their jeffrey-greg-doorprojects. Jeffrey’s work on the refrigeration system is shaping up nicely, and Tim’s been steadily preparing the boat so we can quickly and efficiently install all the systems in the new pilothouse. Greg’s been turning out windows and doors all week. Our good friends Pete and Jackie graciously loaned us the use of their garage to set up a varnish shop, and with the help of their daughter Naomi, I got started on the bright work. I also put together a little video for you to enjoy…

-Christine